1、 What is vibration testing?

Vibration test (vibration test): A test that simulates various vibration conditions through various vibration testing equipment to verify the impact of vibration on the product. The purpose of vibration testing is to determine whether a product may withstand external or self generated vibrations during transportation, use, and operation, without being damaged and able to maintain its original performance, and achieve the expected lifespan and reliability.

2、 What are the types of vibration tests?

Sinusoidal vibration (sweep frequency vibration, fixed frequency vibration, resonance search and dwell), random vibration, sine+random, random+random, sine+random+random, road spectrum simulation, etc. Youruite Testing has the ability to conduct vibration tests of all types mentioned above, with multi-channel controllers from brands such as Yiheng, Tengzhen, VR, etc., which can achieve multi-channel control and monitoring.

3、 Does Youruite have the ability to conduct vibration testing?

4、 Why choose Yourit testing?

1. Experienced technical team

2. Professional testing equipment and venue

3. Wide coverage of detection capabilities

4. Strong technical support capabilities, including tooling design, experimental scheme design, technical training, rectification, etc.

5. Numerous successful cooperation cases

5、 Vibration test standards?

Automotive Electronics:

ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronic equipment

GB/T 28046 Environmental Conditions and Tests for Electrical and Electronic Equipment of Road Vehicles

GB/T 19392 General Specification for Vehicle mounted Satellite Navigation Equipment

QC/T 413 Basic Technical Conditions for Automotive Electrical Equipment

QC/T 417 Automotive Wire Harness Connector

GB/T 18488 Drive Motor Systems for Electric Vehicles

ANSI/EIA-364-28F Vibration test procedure for electrical connectors and sockets

VW8 Electric and Electronic Components in Motor Vehicles up to 3.5 t General Requirements, Test Conditions, and Tests

Stress Testing Verification of AEC Q200 Passive Components

Rail transit:

IEC 61373 Railway Applications - Rolling Stock Equipment - Impact and Vibration Testing

GB/T 21563 Rail Transit Rolling Stock Equipment Impact and Vibration Testing

IEC 60571 Railway Applications - Electronic Equipment for Rail Transit

EN 50155 Railway applications - Rolling stock - Electronic equipment

GB/T 25119 Electronic Devices for Rail Transit Rolling Stock

IEC 62498 Environmental Conditions for Railway Application Equipment

GB/T 32347 Environmental Conditions for Rail Transit Equipment

Communication equipment:

ETSI EN 300 019 European Standard (Telecommunications series),Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; European Standards (Telecommunications Series), Environmental Engineering (EE); Environmental conditions and testing of telecommunications equipment;

GR-63 NEBS Requirements: Physical ProtectionGeneral requirements for physical protection of network equipment - computer room systems

GR-3108 Generic Requirements for Network Equipment in the Outside Plant (OSP) Test conditions for electronic parts of outdoor communication products

GR-487 Generic Requirements for Electronic Equipment Cabinets General requirements for electronic equipment cabinets

GR-3031 Generic Requirements for Indoor Electronic Equipment Cabinets General requirements for indoor electronic equipment cabinets

GR-1312 Generic Requirements for Optical Fiber Amplifiers and Proprietary Dense Wavelength-Division Multiplexed Systems General requirements for fiber amplifiers and proprietary dense wavelength division multiplexing systems

GR-468 Generic Reliability Assurance Requirements for Optoelectronic Devices Used in Telecommunications Equipment 

General reliability assurance requirements for radio and television devices used in telecommunications equipment

YD/T 1539 Technical Requirements and Test Methods for Reliability of Mobile Communication Handsets

GB/T 33768 Reliability Test Methods for Optoelectronic Devices Used in Communication

GB/T 21194 General Requirements for Reliability of Optoelectronic Devices Used in Communication Equipment

Electrician/Electronics:

IEC 60068-2 Environmental testing- Part2：Tests methods Environmental testing methods

GB/T 2423.10 Environmental Testing Part 2: Test Methods Test Fc: Vibration (sinusoidal)

GB/T 2423.35 Environmental Testing - Part 2: Tests and Guidelines - Comprehensive Tests for Climate (Temperature, Humidity) and Dynamics (Vibration, Impact)

GB/T 2423.56-2018 Environmental Testing Part 2: Test Methods Test Fh: Broadband Random Vibration and Guidelines

IEC60068-2-6 Environmental testing -NPart 2-6: Tests- Test Fc: Vibration (sinusoidal)

IEC60068-2-53 Environmental testing- Part 2-53: Tests and guidance- Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

IEC60068-2-64 Environmental testing- Part 2-64: Tests- Test Fh: Vibration, broadband random and guidance 

Military equipment:

MIL-STD-810H Environmental Engineering Considerations and Laboratory Tests
GJB 150A Military Equipment Laboratory Environmental Testing Methods

Luminaires/Lighting:

ANSI C136.31 For Roadway and Area Lighting Equipment- Luminaire Vibration

GB/T 24827 Performance Requirements for Road and Street Lighting Fixtures

GB/T 33721 Reliability Test Methods for Luminaires

GB/T 10485 Road Vehicles - External Lighting and Light Signaling Devices - Environmental Durability

Power supply:

GB/T 35590 Information Technology - General Specification for Mobile Power Supplies for Portable Digital Devices

IPC 9592B Requirements for Power Conversion Devices for the Computer and Telecommunications Industries

GB/T 14715 General Specification for Uninterruptible Power Supplies for Information Technology Equipment

GB/T 13722 Technical Requirements and Test Methods for Mobile Communication Power Supplies

Medical:

GB/T 14710 Environmental Requirements and Test Methods for Medical Electrical Appliances

GB/T 15214 Requirements and Methods for Reliability Testing of Ultrasonic Diagnostic Equipment

YY/T 0681 Test Methods for Packaging of Sterile Medical Devices

ASTM D4169 Standard Practice for Performance Testing of Shipping Containers and Systems

Device:

IPC-TM-650 PCB&CCL Test Methods Manual

MIL-STD-202 TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS电GJB 360B电子及电气元件试验方法

MIL-STD-883 TEST METHOD STANDARD MICROCIRCUITS

GJB 548B Test Methods and Procedures for Microelectronic Devices

JEDEC JESD 22 Semiconductor device testing, test and reliability evaluation

Marine equipment:

GB/T 13705 General Requirements for Marine Radio Communication Equipment

GB/T 3783 Basic Requirements for Marine Low Voltage Electrical Appliances

GB/T 7094 Test Method for Vibration (Sine) of Marine Electrical Equipment

Transportation packaging:

ASTM D4169 Standard Practice for Performance Testing of Shipping Containers and Systems

ASTM D4728 Standard Test Method for Random Vibration Testing of Shipping Containers

ISTA series

GB/T 4857.7 Packaging, Transportation, Packaging - Basic Tests - Part 7: Sinusoidal Constant Frequency Vibration Test Method

GB/T 4857.10 Packaging - Basic Tests for Transport Packaging - Part 10: Sinusoidal Variable Frequency Vibration Test Method

GB/T 4857.23 Packaging - Basic Tests for Transport Packaging - Part 23: Vertical Random Vibration Test Method

ISO 13355 Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test

YY/T 0681.15 Test Methods for Packaging of Sterile Medical Devices Part 15: Performance Testing of Transport Containers and Systems